LGED 2/1
SKF

LGED 2/1

0 Puan - 0 Yorum
Stok Kodu
LGED 2/1
Stok Durumu
Stokta Yok
Fiyat & Stok
WhatsApp Sipariş
Stok Bilgi
Ürün Bilgisi
Ürün Bilgisi

A food grade NSF H1 certified grease based on a synthetic fluorinated oil using a PTFE thickener. It is suitable for extremely high temperatures and/or aggressive environments such as acids/alkalis, vacuum, oxygen etc.

Faydalar

  • ✔ Excellent oxidation resistance
  • ✔ Very low evaporation losses at high temperature
  • ✔ Good corrosion resistance
  • ✔ Long life in aggressive environments such as very reactive areas with a presence of high purity gaseous oxygen and hexane
  • ✔ NSF H1 registered
Lojistik
Ürün net ağırlığı1kg
eClass kodu23-06-01-01
UNSPSC kodu15121902
Özellikler
Speed (max.) n x dm (x 1000)300
DIN 51825 kurallarıKFK2U-30
NLGI tutarlılık sınıfı2
KoyulaştırıcıPTFE
RenkBeyaz
Baz yağ tipiPFPE
Base oil viscosity DIN 51562 at 40 °C460mm²/s
Base oil viscosity DIN 51562 at 100 °C42mm²/s
Raf ömrü2year
SertifikalarNSF H1HelalKoşer
NSF Registration no.156010
20°C’de (68ºF) yoğunluk (DIN 51757)1.96g/cm³
Evaporation losses, 6 weeks at 200 °C, % weight losses<3.5%
Paket boyutu1 kg can
Tek noktalı yağlama için kullanılabilirhayır
Performans
Suitable for High load applications++
Suitable for Vertical shaft applicationsΟ
Suitable for applications with Oscilating movements−
Suitable for applications with Severe vibrationsΟ
Suitable for applications that require Rust protection−
Suitable for applications that require Water resistance+
Suitable for applications that require Frequent start-upΟ
Çalıştırma sıcaklığı aralığı-30  –  240°C
Dropping point (min) ISO 2176300°C
Penetration DIN ISO 2137, Worked, 60 strokes (10⁻¹mm)265-295
Penetration DIN ISO 2137, Prolonged (max.), 100 000 strokes, 10⁻¹mm+30
Mechanical stability - Roll stability, ASTM D1831 (max.) 50 hrs at 80°C, 10⁻¹mm+30
Mechanical stability, V2F test, 144 hrs-
Corrosion protection, Emcor, ISO 11007 modified, Water washout-
Corrosion protection, Emcor, ISO 11007 modified, 0.5% NaCl-
Water resistance (max.) DIN 51807/1, 3 hrs at 90 °C1
Oil separation DIN 51817, 40°C, %1-3
Lubrication ability, R2F test B at 120°CBaşarılı
Copper corrosion (max.) DIN 51811 /ASTM D4048, 24 hrs at 100°C1
Rolling bearing grease life (max.) ROF test, L50 life, 10000 r/min, hrs at °C700 at 220°C
EP performance - 4 ball - Wear scar (max.) DIN 51350/5, 1400N1mm
EP performance - 4 ball - Weld load (min.) DIN 51350/48000N
Maksimum basınç70bar
Boyutlar
Corrosion protection, Emcor, ISO 11007, Distilled water0-0
Yorumlar
Bu ürüne ilk yorumu siz yapın!
Yorum Yaz
Önerileriniz
Bu ürünün fiyat bilgisi, resim, ürün açıklamalarında ve diğer konularda yetersiz gördüğünüz noktaları öneri formunu kullanarak tarafımıza iletebilirsiniz.
Görüş ve önerileriniz için teşekkür ederiz.
LGED 2/1 LGED 2/1
LGED 2/1

Tavsiye Et

*
*
*